Car amp hook up

car amp hook up

Can you connect a car AMP to a home stereo?

You can also connect a car amp to any home stereo, your smartphone, and more as an audio source. There is a catch, though. Because car amps use a different power source than home stereos the biggest problem is getting them the power they need.

How do you hook up a car AMP to a battery?

Connect the amps negative terminal to the cars chassis ground. Use a short negative power wire that is the same diameter as the positive wire that leads to the battery. Insert the main power wire fuse once all the connections for the other wires are in place.

How to connect remote wires to a car amplifier?

So, unscrew the screw and put one end of wire in the remote port, tighten the screw by using a screwdriver. Unscrew the 12V screw, put the other end of the wire in the 12V port and tighten the screw. Now, when you have connected the remote wires with the power wires, you must connect the power wires in the power input port of the car amplifier.

How many speakers can I connect to my car AMP?

Most car amps with front & rear speaker level inputs can be wired to 2 speaker input pairs as shown in the diagram here. When using RCA connections, you can pick up a pair of inexpensive female-to-male Y adapters to split the signal from 2 into 4 connections. (Don’t spend too much on Y adapters as you can use a decent pair of cheap ones just fine)

Can you use a car AMP at home?

Using a car amp…at home? It’s not such a crazy idea after all! While it’s true that it’s not super easy, it’s really not all that hard and you can do it.

How do I connect my amp to my home stereo?

Home stereo use – RCA converter with remote lead: If you’re connecting an amp to speaker outputs you can use a line level converter with a built-in remote wire output. They’ll automatically turn the amp on or off with an input signal present.

How to connect a car amplifier to a car?

Unscrew the 12V screw, put the other end of the wire in the 12V port and tighten the screw. Now, when you have connected the remote wires with the power wires, you must connect the power wires in the power input port of the car amplifier.

Can you connect a home stereo to a car with RCA?

Home stereo with no RCA output jacks + car amp with RCA jack inputs only: In this case, you’ll have no choice but to use a line level converter commonly used for car audio. Just like in #1 above, these are connected just like speakers to unused speaker terminals or alongside an existing speaker set.

Can You Put 4 speakers in a car with a 2-channel AMP?

This process can easily be applied to a car with 4 speakers and only a 2-channel amplifier but check the speakers and amplifier’s impedance to make sure it will not damage your sound system. While this process is entirely possible as long as the amp’s power can accommodate as many speakers as you are using, it does come at the cost of some quality.

How do I connect my car speakers to my amp?

On your amp, there should be marked left and right for your inputs as well. This will correspond with the side of the car that the speaker is on. Connecting your speakers to their corresponding inputs allows you to maintain fader and balance in your audio.

How many speakers can be connected to a car head unit?

The only way to know how many speakers you can connect to your head unit is to ask the manufacturer or read the owner’s manual. As we mentioned before, the vast majority of head units will be able to power four channels (2 front, 2 back) so chances are, your head unit is the same, but it’s always worth double checking.

What size amplifier do I need for my car stereo?

Many technicians recommend that you should stick to 50-Watt or more speakers. Furthermore, you need an amplifier with an RMS power output per channel, which is about 50% greater than the speaker’s most rated RMS power. If you use 50-Watt speaker or less and your stereo can support up to 150 wattage of power output.

Related posts: