How do you hook up a single pole switch

how do you hook up a single pole switch

How do you wire a single pole light switch?

Now that you know which terminals to use, you can wire the switch following the same procedure you would use for any single pole switch. Connect the hot wire from the power source to the common terminal and the hot wire going to the fixture to the uncovered traveler.

What is a single pole switch?

A single pole switch controls a light or lights from one location. Single pole switches have two screw terminals, and some single pole switches also come with a green screw for the ground wire. Leviton offers Decora style and traditional toggle style single pole switches.

What does the ground screw do on a single pole switch?

The other terminal is for a second hot wire, called a switch leg, that runs only between the switch and the light fixture. The switch leg brings power to the fixture when the switch is turned on. The ground screw is for the circuit ground wire connection. Standard single-pole switches do not connect to neutral circuit wire.

How do you hook up a metal switch to a ground?

Connect one of the hot wires to one of the side switch terminals, and connect the other hot wire to the other terminal. Make sure all of the connections are very tight. Metal switch boxes require a ground connection to the circuit wiring. An easy way to ground the box is to connect two pigtail wires to the circuit ground.

What is the best way to wire a single pole switch?

Proper wiring for a single-pole switch that controls a light from the center of a circuit. Easiest to wire is a single light that occurs at the end of a circuit. When an un-switched circuit continues from a switched light, this is how to wire it. A dimmer switch is wired the same way as a single-pole switch.

How do you attach a light fixture to a single pole?

Attach the fixture to the ceiling electrical box following the directions from the light fixtures manufacturer. Wrap the black wire in the switch box around the top right brass screw on the single pole light switch. Wrap the white wire marked with black electrical tape around the bottom right brass screw on the switch.

What is a single pole switch used for?

Single-pole light switch controls lights from one location. Leviton When wiring switches, this type of cable may be used as a switch leg—where you need two black wires to go from the switch to black wires located at the light or at an intermediate electrical box.

How do you wire a light switch wire?

Wiring a light switch is very simple. The white (neutral) wire from the power source and the white (neutral) wire that goes to the light fixture get connected to each other. The black (hot) wires are what get connected to the light switch. Again, excuse my paint-covered hands.

How do you ground a light switch?

Connect the fixtures ground lead (usually a stranded wire) to the strap on a metal box or to a ground wire. Most older switches are not grounded; many switches do not even have a ground screw. Recent codes call for switches to be grounded. Replace an older switch with a newer one that has a ground screw and connect it to a ground wire.

How do you connect a light switch to a metal box?

On light switches there is a green screw on the upper left side. This is where the ground wire would be connected. When you screw the light switch into the wall, it will make contact with the metal box. As long as the box is grounded, it will pick up the ground through the connection.

How do I connect the switches to the electrical panel?

To connect the switches, simply score the wire with your wire stripper and push the insulation to expose about 3/4 in. of bare wire. Connect the last switch in the usual manner, looping the wire around the screw in a clockwise direction. 18 / 28

How do you wire a toggle switch with wire?

1 Determine the gauge of the existing wire and obtain a wire of the same color and gauge. 2 Cut a piece of the wire long enough to reach from the cut end of the supply wire to the toggle switch. 3 Strip 1⁄2 inch (1.3 cm) of insulation from each end of this piece of wire. More items...

Related posts: