Sparkfun openscale hookup guide

sparkfun openscale hookup guide

How do I read load cells on SparkFun openscale?

The SparkFun OpenScale makes reading load cells easy. Attach a four-wire or five-wire load cell of any capacity, plug OpenScale into a USB port, open a terminal window at 9600bps, and you’ll immediately see mass readings.

What is openscale?

OpenScale combines the HX711 breakout board with an Atmega328P running Arduino and extensive pre-loaded configuration firmware to create an off-the-shelf solution for load cell reading. OpenScale was designed for projects and applications where the load was static (for example a bee hive) or where constant readings are needed...

What is the SparkFun OpenLog?

The SparkFun OpenLog can store, or log, huge amounts of serial data and act as a black box of sorts. added to your cart ! The SparkFun OpenScale is a simple-to-use, open source solution for measuring weight and temperature. It has the ability to r…

How do I configure openscale to work with Arduino?

Once OpenScale is connected and reporting to your terminal window press x (or sending the character via the Arduino Serial Monitor with the Enter key) to bring up the configuration menu. Press the corresponding letter or number to control that setting.

How do I read a load cell in SparkFun?

The SparkFun OpenScale makes reading load cells easy. Attach a four-wire or five-wire load cell of any capacity, plug OpenScale into a USB port, open a terminal window at 9600bps, and you’ll immediately see mass readings. To learn more about load cells see our tutorial on Getting Started with Load Cells.

What is SparkFun openscale?

The SparkFun OpenScale is a simple-to-use, open source solution for measuring weight and temperature. It has the ability to r… OpenScale combines the HX711 breakout board with an Atmega328P running Arduino and extensive pre-loaded configuration firmware to create an off-the-shelf solution for load cell reading.

How do I hook up the load cell to openscale?

The load cell is hooked up by matching the colored wires to the corresponding screw terminal on OpenScale. OpenLog is connected through the Serial Out port, although only TX to RX, 5V to VCC and GND to GND (OpenScale to OpenLog order) are necessary for logging the data. Power through USB, and open a serial terminal at a baud rate of 9600.

What is openscale?

OpenScale combines the HX711 breakout board with an Atmega328P running Arduino and extensive pre-loaded configuration firmware to create an off-the-shelf solution for load cell reading. OpenScale was designed for projects and applications where the load was static (for example a bee hive) or where constant readings are needed...

How do I run openscale code on Arduino Uno?

Open the OpenScale.ino sketch located in the /firmware/OpenScale/ directory and hit Verify. Select the “ Arduino Uno ” under the Tools -> Boards submenu. Select the right COM port under the Tools -> Port submenu. Upload the code. High five your nearest neighbor.

What is openscale?

OpenScale combines the HX711 breakout board with an Atmega328P running Arduino and extensive pre-loaded configuration firmware to create an off-the-shelf solution for load cell reading. OpenScale was designed for projects and applications where the load was static (for example a bee hive) or where constant readings are needed...

How do I hook up the load cell to openscale?

The load cell is hooked up by matching the colored wires to the corresponding screw terminal on OpenScale. OpenLog is connected through the Serial Out port, although only TX to RX, 5V to VCC and GND to GND (OpenScale to OpenLog order) are necessary for logging the data. Power through USB, and open a serial terminal at a baud rate of 9600.

How do I set up serial output on openscale?

Serial Output OpenScale is configured via visible ASCII characters and a text menu system. Attach OpenScale via USB and use your favorite terminal software to open the COM port that OpenScale is connected to. By default, the OpenScale communicates at 9600bps 8-N-1.

Related posts: