Sanke keg hook up

sanke keg hook up

How does a sanke keg work?

Sanke kegs have a single valve on the top of them that allows for both beer and gas to pass-through. The beer flows via a spear in the valve that runs to the bottom of the sanke keg. A sankey coupler is essentially sanitary key (Sankey) to unlock the beer inside the sanke keg.

How do you attach a coupler to a keg?

Connect Keg Coupler To connect the keg coupler (10) to the keg (17), first make sure the black pull handle of the keg coupler is in the closed (diagonal/upper) position. Insert the keg coupler into the locking neck of the beer keg and turn clockwise 25° to lock in into place. Now the keg coupler is secured to the keg.

What is a Sankey coupler for kegs?

A sankey coupler is essentially sanitary key (Sankey) to unlock the beer inside the sanke keg. You can order from a few places online. But the most important part is the sankey keg needs to be stainless steel.

How do you tap a keg without breaking it?

To secure the tank connection, pull the tap handle out — away from the keg coupler (10) — and push down until it locks into position. Listen for the “click” of the pull handle when it shifts into the final downward position, and your keg will be tapped.

How does a steel keg work?

The hero always gets carried on the shoulders of fans. Steel kegs are built to withstand pressure, both from the outside and the inside. With some beer containers (casks, mini-kegs, torpedoes and beer balls) the spout is often at the bottom of the vessel, and gravity forces the beer out of the tap when its opened.

How does a keg coupler work?

It uses the compressed air from the CO2 or nitrogen tank to push the beer out of your draft system and into your glass. If your beer keg coupler isnt attached properly, you wont be pouring anything out.

How do you release the pressure on a keg?

You can do this by either the pressure relief valve on the coupler or use a screwdriver or wrench and gently press down on the ball to release the pressure. If you are using the screwdriver or wrench, make sure you set the keg on its side and do it. This way the beer wont shoot up in your face.

Why is the tap at the top of a keg?

With some beer containers (casks, mini-kegs, torpedoes and beer balls) the spout is often at the bottom of the vessel, and gravity forces the beer out of the tap when its opened. But when it comes to the average keg, the tap is at the top. So what makes that beer defy gravity and rise out of the tap?

Related posts: