Hook up line out converter

hook up line out converter

How does a line out converter work?

A line out converter (LOC for short) is a device that you hook up to the head unit of your stereo system to convert the head unit signal into a signal better suited to drive the preamp inputs in amplifiers. In other words, a line out converter is a way to get the most out of your car’s stereo system without replacing the amplifier and head unit.

How hard is it to install a line output converter?

Installing a line output converter in your vehicle is relatively easy for those that are comfortable with the above steps. You can also check out the video above for a step by step walkthrough from one of our professional installers.

What should I look for when buying a line out converter?

Before buying, make sure you are familiar with the following features of line out converters. The output level of your line converter is basically a measure of how “hot” the output signal is.

What voltage should I set my line out converter to?

So if your amp’s max gain input level is 8V, then you want to set your LOC to 8V output. Do line out converters require an external power source? It depends on the kind of line out converter you get.

What is a line output converter used for?

A: Line output converters are sometimes also needed to install a new stereo in a vehicle with a separate factory amplifier. They’re used in conjunction with vehicle-specific wiring adapters to make the new high-powered stereo work with the factory amp.

What are the extra wires on a line output converter?

Shield ground wires: There are usually 1 or 2 extra wires on a line output converter (often brown in color). These wires are used to ground the shield of the RCA output cables to the head unit.

How hard is it to install a line output converter?

Installing a line output converter in your vehicle is relatively easy for those that are comfortable with the above steps. You can also check out the video above for a step by step walkthrough from one of our professional installers.

How does a line output converter (Loc) work?

Most line output converters (LOCs) used in the past few years are designed for high output head units. The speaker output of a high powered head unit is designed to operate in a bridgedconfiguration. The speaker wires from the head unit each have half of the DC battery voltage on them when the head unit is on.

So if your amp’s max gain input level is 8V, then you want to set your LOC to 8V output. Do line out converters require an external power source? It depends on the kind of line out converter you get.

What should the voltage output of a line out converter be?

In general, you want the voltage output of your line out converter to be the maximum gain input that your amp can handle. Doing so ensures that your amp is being used to the fullest but you are not overtaxing it.

Do I need a line output converter for my car?

Many factory stereos included in cars are, frankly, not that good, so many audiophiles opt to install a custom line output converter to connect to their car’s speaker system. In short, a line output converter is a good way to turn a mediocre speaker system into something that really pops.

What should I look for when buying a line out converter?

Before buying, make sure you are familiar with the following features of line out converters. The output level of your line converter is basically a measure of how “hot” the output signal is.

Do I need a line output converter to add an amplifier?

You will need a High Low Converter or Line Output Converter to add an amplifier (subwoofer or 4 channel amplifier) to convert your factory stereos speaker wire into a low level input for your new amplifier. What is A Line Output Converter Also Known as A High Low Converter?

Related posts: