Remote hydraulic hookup

remote hydraulic hookup

How do I hook up my remote hydraulics?

To do this you may also need to remove the fender and step. Locate the end of the small line that comes from the pump (this is the pressure line) and use the hydraulic hose along with the quick disconnect couplings that came with the kit to hook it into the inlet side of your remote hydraulics control valve. (See diagram at the top of the page).

What is a 12 volt remote control hydraulic pump?

This remote control system operates one 12-volt dc hydraulic application (single or dual valve). Many customers are installing this remote control on their hydraulic pump to operate their dump trailers, trailer jacks, boat lifts, snow plows and many more!

How do you hook up a hydraulic hose to a pump?

Locate the end of the small line that comes from the pump (this is the pressure line) and use the hydraulic hose along with the quick disconnect couplings that came with the kit to hook it into the inlet side of your remote hydraulics control valve. (See diagram at the top of the page).

What can you do with a remote control hydraulic pump?

Many customers are installing this remote control on their hydraulic pump to operate their dump trailers, trailer jacks, boat lifts, snow plows and many more! Raise and lower your application from 50-100 feet away or even while staying inside your vehicle!

How do you hook up a hydraulic hose to a pump?

Locate the end of the small line that comes from the pump (this is the pressure line) and use the hydraulic hose along with the quick disconnect couplings that came with the kit to hook it into the inlet side of your remote hydraulics control valve. (See diagram at the top of the page).

How does a hydraulic cylinder remote work?

One remote usually consists of one pair of connectors on the rear of the tractor into which you plug the hoses from the cylinder to be operated. Virtually all cylinders are double acting which means they apply hydraulic power both to extend and to retract the cylinder.

How do you hook up hydraulic couplings to a valve?

Hook up the return (the other end of the steel line that you cut) to the return side of the valve. Now you can attach the quick disconnect couplers for the remotes. When you want to hook up an implement that requires hydraulic pressure (log splitter, etc) just hook them to these couplings.

How do I add remote hydraulics to my Yanmar?

*** You Must use an OPEN center valve and use one with a built in relief valve. *** This is the only way to add remote hydraulics to your Yanmar and still have a functioning three point hitch. Locate the hydraulic pressure line (small line) along the frame.

How do you use a hydraulic pump remote?

This remote is a life saver for those less mobile customers, and for the ones that simply love the convenience! Simply hold down a button on the key fob and let the remote control operate your existing 12-volt dc hydraulic pump. Now there is no need to be restricted to one area to operate your application.

What is a 12 volt remote control hydraulic pump?

This remote control system operates one 12-volt dc hydraulic application (single or dual valve). Many customers are installing this remote control on their hydraulic pump to operate their dump trailers, trailer jacks, boat lifts, snow plows and many more!

What is a remote compensator on a hydraulic pump?

Hydraulic Pump/Motor Division. Remote compensator allows control of pump from a remote location. With addition of a 2 way valve the pump can be forced into a low pressure (differential spring) stand-by condition.

How do I operate a 12-volt DC hydraulic pump?

Simply hold down a button on the key fob and let the remote control operate your existing 12-volt dc hydraulic pump. Now there is no need to be restricted to one area to operate your application.

Related posts: