Sea doo hookup

sea doo hookup

How to connect a hose to a seadoo?

You can get a fitting at a seadoo dealer (cheaper at Walmarts) to do a quick connection, or screw the hose in the fitting. Yes, it is pointing out the back by the jet pump assy nozzle. You can get a fitting at a seadoo dealer (cheaper at Walmarts) to do a quick connection, or screw the hose in the fitting.

Why choose a Sea-Doo?

Always at the forefront of technology, Sea-Doos are the only personal watercraft to utilize DESS keys. DESS keys use radio frequency technology to personalize each key to only one personal watercraft. This prevents theft but also makes replacing a DESS key a challenge.

How do I start my Sea-Doo?

A properly functioning and programmed DESS key will prompt a double beep from the Sea-Doo personal watercraft. When starting a Sea-Doo, you’ll press the red Start/Stop button typically on the left handle. The control panel’s screen will greet you with a welcome greeting.

How do you cool down a seadoo?

Connect the hose and start the seadoo. Turn on the water after it is started. Turn off the water, than shut down the seadoo. This way it wont allow water to back flow into the engine through the exhaust due to no back pressure from the engine not running. The bearings and seals on the impeller jet pump, are cooled from being in the water.

How do you connect a jet pump to a seadoo?

Yes, it is pointing out the back by the jet pump assy nozzle. You can get a fitting at a seadoo dealer (cheaper at Walmarts) to do a quick connection, or screw the hose in the fitting. Yes, it is pointing out the back by the jet pump assy nozzle.

How do you cool down a seadoo?

Connect the hose and start the seadoo. Turn on the water after it is started. Turn off the water, than shut down the seadoo. This way it wont allow water to back flow into the engine through the exhaust due to no back pressure from the engine not running. The bearings and seals on the impeller jet pump, are cooled from being in the water.

Can you hook up a hose to a cylinder head?

Then hook that hose back up like it is. Not a big deal, cut an old garden hose clamp out on and youll be good to go. If you had that green housye you could. But, assuming you dont, youll have to adapt from your garden hose to the cylinder head. Then hook that hose back up like it is.

How do you connect the hose to the jet pump?

You can get a fitting at a seadoo dealer (cheaper at Walmarts) to do a quick connection, or screw the hose in the fitting. Yes, it is pointing out the back by the jet pump assy nozzle. You can get a fitting at a seadoo dealer (cheaper at Walmarts) to do a quick connection, or screw the hose in the fitting. Click to expand...

Related posts: