Lilypad hookup guide

lilypad hookup guide

How to use the Lilypad Development Board?

To power up the LilyPad Development Board, connect it to your computer using a FTDI and mini-B USB cable, or attach an E-Textiles Battery. Then slide the switch on the right side of the LilyPad Arduino Simple to the ON position. First the white LEDs turn on individually one at a time. Then the RGB LED will blink each color.

What kind of USB cable do I need for my Lilypad?

This is a USB 2.0 type A to Mini-B 5-pin cable. You know, the mini-B connector that usually comes with USB Hubs, Cameras, MP3… Note: The LilyPad FTDI is included in the LilyPad Development Board. If you bought the LilyPad Arduino Simple board separately, you will need both the mini-B USB cable and FTDI to follow along with this guide.

How do I identify a lilypad USB plus board?

This used to be difficult to determine, but this board has a handy feature that identifies itself. Go to the Tools > Port menu, and select the port that has LilyPad USB Plus next to it. On Windows ports are listed as COM##; on a Mac or Linux machine they will be /dev/cu.usbmodem####.

How do I power the Lilypad protosnap plus?

The LilyPad ProtoSnap Plus can be powered in two ways: If you have a USB power source available (a computer, 5V USB wall adapter, USB battery pack, etc.), you can run the board from a USB cable. If youd like your project to be more portable, you can easily attach a rechargable Lithium-polymer battery to the board.

How do I power the Lilypad Development Board?

To power up the LilyPad Development Board, connect it to your computer using a FTDI and mini-B USB cable, or attach an E-Textiles Battery. Then slide the switch on the right side of the LilyPad Arduino Simple to the ON position. First the white LEDs turn on individually one at a time.

How to use Lilypad with Arduino?

Use your LilyPad Arduino USB on the Arduino Web IDE. Use your LilyPad Arduino USB on the Arduino Desktop IDE Connect the board. Open your first sketch. Select your board type and port. Upload the program. Learn more on the Desktop IDE. Tutorials. Please Read...

What is the protosnap Lilypad Development Board?

The ProtoSnap LilyPad Development Board features a conglomerate of some of our favorite LilyPad boards. At the center of this mish-mash is our LilyPad Arduino Simple Board -- a small, LilyPad version of the popular Arduino development platform.

How many microcontrollers does Lilypad use?

Similar to the Arduino Leonardo and Micro, the LilyPad Arduino uses only a single microcontroller (the Atmel ATmega32U4) to both run your sketches and communicate over USB with the computer.

How do I connect the Lilypad protosnap plus to my Arduino?

1. Connect the LilyPad ProtoSnap Plus to your computer using a USB cable. 2. Select LilyPad USB Plus from Arduinos Board menu. 3. Select LilyPad USB Plus from Arduinos Port menu.

What is inside the protosnap plus?

At the center of the ProtoSnap Plus is a LilyPad USB Plus microcontroller, pre-wired to LilyPad pieces including a LilyPad Light Sensor, LilyPad Buzzer, LilyPad Button Board, four pairs of colored LilyPad LEDs, and a LilyPad Slide Switch.

How many Lilypad components are in the Lilypad protosnap plus?

The LilyPad ProtoSnap Plus features twelve LilyPad components connected to a LilyPad microcontroller by conductive pathways called traces. For reference, each component on the ProtoSnap has a nearby label with its name and the number of the LilyPad USB Plus sew tab it is connected to.

What is the Lilypad USB Plus and how does it work?

The LilyPad USB Plus is an Arduino-compatible microcontroller similar to the LilyPad Arduino USB - ATmega32U4 Board but with some additional features and three additional sew tabs. It is currently only available on the LilyPad ProtoSnap Plus.

Related posts: