Factory radio sub hook up

factory radio sub hook up

How to install a powered subwoofer to a factory stereo?

You can connect the ground wire with your car chassis or any other nearby part. This is an essential step for installing a powered subwoofer to a factory stereo. You must check that a bolt is used to secure the wire properly. The ground wire must be attached to the naked metallic part of your car to work properly.

What is a powered subwoofer and how does it work?

Powered subwoofers consist of an integrated amplifier, speaker driver and a modified enclosure for a powered subwoofer. This unique combination ensures that you will only listen to neat bass. In this article, our editors have explained in detail about Installing a powered subwoofer to a factory stereo.

Do powered subwoofers deliver high quality bass?

You should use the recommended tools for powered subwoofers. Powered subwoofer once installed properly with a factory stereo will always deliver high-quality bass. I love to listen to my favorite tracks while I travel, with a good subwoofer, you can enjoy powerful and deep bass.

How to wire a car stereo to a car?

The power cable should run under the car carpet and must be attached with tape or glue. At the car stereo end, all the wires are already attached, and now it is time to set the ground wire. Setting up a ground wire is easy, just follow these steps. You can connect the ground wire with your car chassis or any other nearby part.

How to install a subwoofer in a car?

Subwoofer requires space and air to work properly, select a suitable place within your car. At this stage, you need to add power cables with your subwoofer, if you are placing subwoofer away from the car stereo, you may need an extra power cable. Carefully secure both ends of the power cable and properly attach it with your subwoofer.

Why should you install a powered subwoofer to a factory stereo?

Poor sound quality can totally ruin your mood, making you angry without cause. Music is a beautiful form of art and you wouldn’t want to ruin your music experience due to the lack of a proper sound system, and this is exactly why you need to know how to install a powered subwoofer to a factory stereo.

How to install a car stereo in a car?

The power cable should run under the car carpet and must be attached with tape or glue. At the car stereo end, all the wires are already attached, and now it is time to set the ground wire. Setting up a ground wire is easy, just follow these steps.

What tools do you need to install a powered subwoofer?

Unlike the regular subwoofer, a powered subwoofer includes all the components that make up a subwoofer system – the subwoofer, enclosure, and amplifier. These are the major tools that one will require for the installation of a powered subwoofer.

Any well-made subwoofer should sound pretty good in your system if you work to get the blend right. But if you choose carefully, you can get exactly the bass that appeals to your taste. Like it tight’n’punchy?

What is the best subwoofer for a PA system?

How do I connect a car stereo to a car?

Connect the remaining wires. Plug in the antenna cable and connect the stereos wiring adapter to the the cars wire harness. Connect the output converter if one is needed to make the new stereo compatible with the cars audio system. Have in mind that all wires should be connected in the end and there should no single one hanging unattended.

Can I use a computer power supply for a car stereo?

Using an ATX (desktop computer) power supply for a car stereo isn’t hard – in fact, you only need a few steps: Power connections: Cut a +12V wire (yellow) and a ground (black) wire from the main connector. Strip the insulation to leave about 3/8″ to 1/2″ bare wire.

How do you hardwire a car radio to turn on?

Turning the radio on: You can do this by hardwiring the radio’s accessory wire (usually red) to the +12V battery wire or you can use a switch in between. If you hardwire the accessory wire to the yellow wire (battery power), you can turn the car stereo off with the power supply on/off control.

Where does the power wire come from on a car stereo?

The power wire coming from the stereo is usually red, and likely will connect to a red wire from the car. The ground wire for the stereo will be black, as will its corresponding wire from the car. If there is no ground wire, you can secure the ground cable to bare metal in the body of the car to serve as a ground.

Related posts: