What do i need to hook up subs to a stock radio

what do i need to hook up subs to a stock radio

How to hook up a subwoofer to a receiver?

If the subwoofer features spring clips in order to use speaker wire, then you can use the speaker output of the receiver to hook it all up. This process is the same as connecting a basic stereo speaker. Be sure to mind the channels.

How to connect a subwoofer to a car amplifier?

With the speaker wires, connect the subwoofer system wiring to the amplifier. Make sure that you connect the speaker wires to the negative and positive outputs of your car’s amplifier. Route the speaker wires to where the subwoofer is located.

How do you hook up RCA speakers to a car stereo?

First, strip the wires from the stereo wiring and then make the proper connections with the corresponding speaker connector terminal. Make sure each wire is secure and the wire is not loose, but do not overtighten it. Then connect your RCA cables to the corresponding places on both your LOC and your amplifier.

Where to run speaker wires?

Route the speaker wires to where the subwoofer is located. If the amplifier is located away from the subwoofer, make sure that you run the wires under the carpeting of the car to keep it out of sight.

How do I connect my subwoofer to my Receiver?

If your subwoofer has speaker level inputs built-in you’re in great shape! Just connect them directly to your amplifier or receiver’s speaker outputs, either to unused speaker terminals or at the same time (in parallel) with speakers connected to the receiver.

What cable do I need to hook up a subwoofer?

If your subwoofer has a single RCA subwoofer input jack, you may want to pick up a “Y” RCA adapter to combine both receiver channels on the output side into a single mono RCA plug. Subwoofers with 2 (stereo) RCA jack inputs will need a standard stereo male-male RCA cable.

What is a subwoofer input on a receiver?

In most cases, a subwoofer input jack, if you had one on a receiver, is a “mono” (monaural, 2 stereo channels combined into one) signal you connect with a single RCA cable. Shown: What a receiver with a subwoofer output jack looks like as found on many newer receivers.

How do you connect a subwoofer to a RCA jack?

To convert speaker level outputs from your amplifier or receiver to RCA jack subwoofer outputs, you’ll connect the provided speaker wire connections (marked by colors and striped) just like you would regular speakers. You then connect RCA cables (or a single cable, depending on your particular one) to your powered subwoofer.

How do you run speaker wire through walls?

In order to run speaker wire through the walls, an individual will need a low-voltage jack and a cover plate, in addition to speaker wire. Run wire down through a wall and back through a hole that a speaker will cover with help from the owner of a custom audio/video installation company in this free video on running speaker wire through walls.

How to hide surround sound speaker wires?

The only drawback of wire tapes is that to use them you must have flat wire terminal blocks that have a pair for each speaker. To connect this you have to attach one side to the rear speaker wire that goes to the back of speaker. Connect the other side to the flat copper wiring. This was the first answer to how to hide surround sound speaker wires.

What are the disadvantages of a wire tape speaker?

The only drawback of wire tapes is that to use them you must have flat wire terminal blocks that have a pair for each speaker. To connect this you have to attach one side to the rear speaker wire that goes to the back of speaker. Connect the other side to the flat copper wiring.

Related posts: